Concentric Reducers are used to join pipe sections on same axis. PTFE/PFA/FEP Lined Concentric Reducers provide good finish & strength and also are corrosion and weather resistant.
PTFE/PFA/FEP Lined Eccentric Reducer
Eccentric reducers are frequently used to avoid trapping of air within the system, so they are often used when both air and liquids may be flowing together. PTFE/PFA/FEP Lined Eccentric Reducers provide good finish & strength and also are corrosion and weather resistant.
PFA Lined Reducing Flange
When different sizes of pipes are fitted together, reducing flanges are used. PFA Lined Reducing Flanges provide good finish & strength and also are corrosion and weather resistant.
PTFE Lined Elbows/Bends
In a pipeline system, Elbows or Bends are used to allow change of direction. Usually they have 90 degree or 45 degree angle. PTFE Lined Elbows/Bends provide good finish & strength and also are corrosion and weather resistant.
PTFE/PFA Lined Instrument Tee
Instrument Tees are fundamental to purified water distribution systems as they allow assembly of pressure gauges, avoiding accumulation of stagnant and contaminated water between valve and water distribution circle. PTFE/PFA Lined Instrument Tee have good mechanical strength and dielectric conductivity.
PTFE/PFA/FEP Lined Cross
Crosses have one inlet and 3 outlets and are used when diversion of liquids in pipe lines is required. They are easy to maintain as compared to other fittings.
PTFE/PFA/FEP Lined Tee
It is used to combine or divide fluid flow. Finding use in low and middle pressure fluid pipeline, boiler, petroleum and natural gas industry and other areas. It has durable construction finish so as to provide for lasting service usage.
Antistatic PTFE/PFA Lined Fitting
Using Antistatic PTFE Liners, we can avoid static electricity built up on the liner surface. If fuels, solvents, freon, steam air, powder flow through the pipeline, the chances of static electricity being built is high so in such cases antistatic PTFE/PFA Lined Fitting is used.
PTFE Lined I-Section
PTFE Lined I-Section are used for fitting flow control instruments like pressure gauges.